Cal/OSHA Fall Protection (Construction) Compliance for Construction
8 CCR §1670–1671 / §1632 — Cal/OSHA's construction fall-protection regime — covers personal fall arrest systems (§1670), restraint and positioning systems (§1671), skylight protection (§1671.1), and floor/roof/wall openings (§1632). Distinct from federal 1926.501 with stricter prescriptive requirements.
All California construction employers with workers exposed to falls.
How Cal/OSHA Fall Protection (Construction) Applies to Construction
Cal/OSHA fall-protection rules are stricter than federal in several details — skylight protection (§1671.1) and the rescue-plan requirement for any PFAS use are the most-missed differences. Roof work near skylights without screens or rails is essentially an automatic Serious citation.
Key Requirements
- Fall protection required at 7.5 ft from unprotected sides/edges in construction (lower than the federal 6 ft for some operations; higher trigger for steel erection)
- Personal fall-arrest systems must arrest a fall with maximum arresting force ≤1,800 lb (vs federal 1,800 lb but with stricter component criteria)
- Skylights must be protected by guardrails or screens capable of withstanding twice the maximum potential load
- Floor, roof, and wall openings protected by guardrails, covers, or PFAS
- Anchorage points capable of supporting 5,000 lb per worker (or designed by qualified person at 2× maximum arresting force)
- Rescue plan required whenever PFAS is in use
- Annual inspection of PFAS components by competent person; before each use by user
Most-Cited Violations
§1670(a) — No PFAS or guardrails for exposed edges/openings§1671.1 — Skylight not protected§1632(b) — Floor opening not protected§1670(b) — No rescue plan for PFAS use
Typical fine range: $2,500–$25,000 per Serious citation. Repeat/Willful: up to $158,727. Fall-protection citations are the #1 most-cited Cal/OSHA construction standard category.
How SafetyNet Helps Construction Employers Comply with Cal/OSHA Fall Protection (Construction)
- Gap Assessment — Third-party audit against T8 §1670 with prioritized remediation roadmap.
- On-Site Managed Services — Embedded certified safety professional running your Cal/OSHA Fall Protection (Construction) program day-to-day.
- Citation Assistance — If you have received a T8 §1670 citation, our consultants help with informal-conference negotiation and abatement.
Free Tools
- Free OSHA Self-Assessment — 26-question check in 5 minutes
- OSHA Fine Estimator — Estimate your citation exposure
- Talk to a Consultant — Free 30-minute consultation
Cal/OSHA Fall Protection (Construction) for Other Industries
- Cal/OSHA Fall Protection (Construction) for General Manufacturing
- Cal/OSHA Fall Protection (Construction) for Logistics & Warehousing
- Cal/OSHA Fall Protection (Construction) for Hospitals & Healthcare
- Cal/OSHA Fall Protection (Construction) for Aerospace
- Cal/OSHA Fall Protection (Construction) for Semiconductor
- Cal/OSHA Fall Protection (Construction) for Food Processing
Other Standards Relevant to Construction
This page summarizes federal OSHA requirements. State-plan jurisdictions may have stricter requirements. Fine ranges are planning estimates; they are not legal advice. For a binding compliance assessment, contact a SafetyNet consultant.