Walking-Working Surfaces Compliance for Hospitals & Healthcare

29 CFR 1910.22 — Requires walking-working surfaces to be kept clean, dry, free of hazards, and inspected regularly. Covers the foundational housekeeping and surface-condition rules.

All general-industry employers.

How Walking-Working Surfaces Applies to Hospitals & Healthcare

Healthcare floors must address slip resistance (especially around food service, sterilization, and surgical wet areas) plus contamination control. Inspection cadence is rarely documented.

Key Requirements

  • Surfaces kept clean, orderly, and sanitary
  • Surfaces kept dry where practicable; drainage or non-slip surfacing where wet conditions are routine
  • Floor loading limits posted where applicable
  • Regular and routine inspection of walking-working surfaces
  • Hazards corrected before workers are exposed (or guarded if correction is not immediate)

Most-Cited Violations

  • 1910.22(a)(1) — Housekeeping not maintained
  • 1910.22(d)(1) — No regular inspection of walking-working surfaces
  • 1910.22(b) — Surface loads not posted or exceeded

Typical fine range: $3,000–$12,000 per Serious citation. Slips/trips drive many recordable cases.

How SafetyNet Helps Hospitals & Healthcare Employers Comply with Walking-Working Surfaces

  • Gap Assessment — Third-party audit against 1910.22 with prioritized remediation roadmap.
  • On-Site Managed Services — Embedded certified safety professional running your Walking-Working Surfaces program day-to-day.
  • Citation Assistance — If you have received a 1910.22 citation, our consultants help with informal-conference negotiation and abatement.

Free Tools

Walking-Working Surfaces for Other Industries

Other Standards Relevant to Healthcare

This page summarizes federal OSHA requirements. State-plan jurisdictions may have stricter requirements. Fine ranges are planning estimates; they are not legal advice. For a binding compliance assessment, contact a SafetyNet consultant.