Cal/OSHA Indoor Heat Compliance for Aerospace

8 CCR §3396 — Cal/OSHA's indoor heat illness prevention standard, effective July 23, 2024. Applies whenever an indoor work area reaches 82°F. Triggers higher controls at 87°F (or 82°F for radiant-heat work or required clothing).

Employers with indoor work areas where temperature equals or exceeds 82°F when employees are present.

How Cal/OSHA Indoor Heat Applies to Aerospace

Aerospace painting, composite cure, and heat-treat operations trigger §3396; PPE-required work areas hit the 82°F radiant/clothing threshold even at lower ambient temps.

Key Requirements

  • Measure and record temperature when indoor area reaches 82°F
  • Provide cool drinking water (1 quart/employee/hour)
  • Provide cool-down areas at or below 82°F
  • Cool-down rest periods of at least 5 minutes when needed
  • Engineering controls (ventilation, isolation, AC) when temp ≥87°F (or 82°F + radiant heat / required clothing)
  • Written Indoor Heat Illness Prevention Plan integrated with the IIPP
  • Acclimatization for new and returning employees
  • Annual training in language understood by employees
  • Emergency response procedures

Most-Cited Violations

  • §3396(e) — No engineering controls when required
  • §3396(g) — No written plan
  • §3396(f) — No employee training
  • §3396(c) — Cool-down area not provided or not at 82°F or below

Typical fine range: $2,500–$25,000 per Serious citation. Standard is new (effective July 2024) — Cal/OSHA enforcement is ramping with significant inspection focus on warehouses, manufacturing, kitchens, and laundries.

How SafetyNet Helps Aerospace Employers Comply with Cal/OSHA Indoor Heat

  • Gap Assessment — Third-party audit against T8 §3396 with prioritized remediation roadmap.
  • On-Site Managed Services — Embedded certified safety professional running your Cal/OSHA Indoor Heat program day-to-day.
  • Citation Assistance — If you have received a T8 §3396 citation, our consultants help with informal-conference negotiation and abatement.

Free Tools

Cal/OSHA Indoor Heat for Other Industries

Other Standards Relevant to Aerospace

This page summarizes federal OSHA requirements. State-plan jurisdictions may have stricter requirements. Fine ranges are planning estimates; they are not legal advice. For a binding compliance assessment, contact a SafetyNet consultant.